Compact and highly resilient:
- The rack pull station is designed like the lower part of a power rack
- In terms of resilience, they are in no way inferior to their great role models
- High-quality steel in combination with special nylon straps, which are also used in crane systems and industry, result in a load capacity of 500 kg
- Compact design and a weight of only 14 kg
- They offer maximum mobility and can be stored quickly and space-saving when not in use
Compatible with all barbells and special dumbbells:
- Because there is no fixed cross connection between the two units, the distance between them can be chosen as desired and barbells with different internal dimensions can be placed on them
- Unlike comparable belt systems that are permanently installed on power racks, in this case, for example, shorter SZ bars can also be placed in them
Joint-friendly and healthy training:
- If you use a barbell on a landmine , you can use the rack pull station to get a better starting position by raising it
- This way, you can hook yourself in more easily with a carabiner, for example, during belt squats and still use the full range of motion by pushing the rack pull station to the side after lifting the weight.
- Before the last repetition, simply place the belt system back under the barbell so that you are not forced into a too deep squat when you put it down
- This prevents a rounded back and overloading of the knee
Easy loading and unloading of the barbell:
- Under load, the lowest point of the belt is 23 cm above the ground
- Olympic bumper plates with a diameter of 45 cm have 2 cm of space to the ground when placed on an Olympic barbell
Rack pulls without an expensive rack:
- Rack pulls are a variation of the deadlift
- Bar is placed on nylon straps - even distribution of weight
- In the case of cast iron discs, different weight gradations usually also have different disc diameters, which represents a punctual and therefore unfavourable load for the subsurface
- Furthermore, placing the bar on the nylon straps is much smoother and less noisy
- 2 cm distance from the ground allows you to train with more weight while protecting your back
- At the same time, the upper back muscles and grip strength are additionally strengthened by the higher weight
- Rack pulls are great for improving your deadlift lockout
- If you want to have the same range of motion as with deadlifts, you can use a piece of our fitness flooring as a platform to raise yourself by 2 cm and create a balance
Well thought-out design
- The extra-wide feet make tipping impossible
- Pre-drilled holes for screwing into the gym floor
- The black powder coating of the steel and the black nylon straps fit visually into any training environment
LifeTime warranty on frame:
- ATLETICA LifeTime warranty on base frame
- 5-years on attachments
- Test risk-free for 100 days
- Free shipping
- Free shipping returns with convenient pickup from home
TECHNICAL DETAILS
Height: | 30cm |
Width outside dimensions: | 45cm |
Depth: | 33cm |
Net weight: | 14kg |
Rack pull station: | 1x pair |
Warranty & Certification
Guarantee: | 5-years |
Permit: | EN 20957 H , Home |
Description
Compact and highly resilient:
- The rack pull station is designed like the lower part of a power rack
- In terms of resilience, they are in no way inferior to their great role models
- High-quality steel in combination with special nylon straps, which are also used in crane systems and industry, result in a load capacity of 500 kg
- Compact design and a weight of only 14 kg
- They offer maximum mobility and can be stored quickly and space-saving when not in use
Compatible with all barbells and special dumbbells:
- Because there is no fixed cross connection between the two units, the distance between them can be chosen as desired and barbells with different internal dimensions can be placed on them
- Unlike comparable belt systems that are permanently installed on power racks, in this case, for example, shorter SZ bars can also be placed in them
Joint-friendly and healthy training:
- If you use a barbell on a landmine , you can use the rack pull station to get a better starting position by raising it
- This way, you can hook yourself in more easily with a carabiner, for example, during belt squats and still use the full range of motion by pushing the rack pull station to the side after lifting the weight.
- Before the last repetition, simply place the belt system back under the barbell so that you are not forced into a too deep squat when you put it down
- This prevents a rounded back and overloading of the knee
Easy loading and unloading of the barbell:
- Under load, the lowest point of the belt is 23 cm above the ground
- Olympic bumper plates with a diameter of 45 cm have 2 cm of space to the ground when placed on an Olympic barbell
Rack pulls without an expensive rack:
- Rack pulls are a variation of the deadlift
- Bar is placed on nylon straps - even distribution of weight
- In the case of cast iron discs, different weight gradations usually also have different disc diameters, which represents a punctual and therefore unfavourable load for the subsurface
- Furthermore, placing the bar on the nylon straps is much smoother and less noisy
- 2 cm distance from the ground allows you to train with more weight while protecting your back
- At the same time, the upper back muscles and grip strength are additionally strengthened by the higher weight
- Rack pulls are great for improving your deadlift lockout
- If you want to have the same range of motion as with deadlifts, you can use a piece of our fitness flooring as a platform to raise yourself by 2 cm and create a balance
Well thought-out design
- The extra-wide feet make tipping impossible
- Pre-drilled holes for screwing into the gym floor
- The black powder coating of the steel and the black nylon straps fit visually into any training environment
LifeTime warranty on frame:
- ATLETICA LifeTime warranty on base frame
- 5-years on attachments
- Test risk-free for 100 days
- Free shipping
- Free shipping returns with convenient pickup from home
Details
TECHNICAL DETAILS
Height: | 30cm |
Width outside dimensions: | 45cm |
Depth: | 33cm |
Net weight: | 14kg |
Scope of delivery
Rack pull station: | 1x pair |
warranty
Warranty & Certification
Guarantee: | 5-years |
Permit: | EN 20957 H , Home |