Foldable multi-press for limited space
- Our innovative design allows you to have a complete workout, including dumbbell training, without an additional barbell and without additional weight plates
- The resistance, for a variety of lever and pull exercises, can be adjusted directly on the device - no more changing the weights, just the pin on the weight blocks
- In addition, the power station can be folded up after training to save space and placed as close to the wall as possible
- The device, which is already very compact in training mode (220 x 127 x 105 cm (height/width/depth), only takes up 53 cm of space in rest mode
- With X-Pollux you save a lot of space and do not need any additional equipment
- Ideal for small rooms and all training areas that also serve another purpose, such as an office, garage, workshop or even living space
Multi-press with plug-in weights
- X-Pollux offers you the possibility of guided barbell training, without additional weight plates, simply by coupling the two weight blocks to the barbell bar of the multi-press
- For training you have 2 x 90 kg weight blocks at a gear ratio of 2:1
- For beginners, the Smith Machine offers more safety than training with free weights, because the barbell can be put down immediately and safely if strength is lost
- The corresponding emergency shelves can be quickly and easily adjusted to 30 different positions using a hook latch
- X-Pollux also reveals decisive advantages to professionals:
- The weight on the multi-press does not need to be stabilized horizontally, allowing optimal concentration on the target muscles
- In addition, the power station is ideal for reduction sets ("drop sets") due to the rapid adaptation of the training weight in order to exhaust the muscles to the maximum
- This involves training until muscle failure and immediately after the set reducing the weight by 15-20% so that further repetitions are possible until exhaustion again
- The Smith Machine is ideal for exercises such as incline bench presses or shoulder presses, where the rotator cuff is less stressed than with free weights
- Flat bench presses, also called guillotine presses on the Smith Machine, are possible, as are squats, lunges, shrugs, scoops, or seated and standing calf presses
Functional Trainer - All-in-One Solution
- You can also use the two 90 kg weight blocks for functional muscle training with the dual cable pull, as well as for seated rowing and lat pulldowns from above
- The cross-over cable pull can be positioned at 30 different levels - both pull towers can be used independently or simultaneously
- The dual pull bar allows you to use both weight blocks at the same time, which allows you to further increase the range of exercises on the functional trainer
- Lat pulldowns, rowing and single-arm cable rows, bicep curls, tricep pushdowns, cable flys, cable chest press, rotational overhead press, lateral and front raises, rear delt flys, face pulls, glute kickbacks, cable crunches, woodchoppers, kayak rows, pallof press, cable deadlifts, squats and much more can be trained with X-Pollux
- The multi-grip pull-up bar with integrated boulder handles allows for various pull-up variations as well as calisthenics exercises and intensive abdominal muscle training
- It has a high-quality rubber coating for a secure grip so that your grip strength does not become the limiting factor
Folding mechanism with 100% tipping stability & stability
- With the innovative folding mechanism, you can transform the device from training mode to space-saving mode in no time
- To do this, simply unlock the footrests, the pull-up bar and the Smith Bar and fold both elements down
- You can then fold the power station from the left and right to the middle and fix the footrests again - this saves you more than 50 cm on your training area
- When folded, the construction continues to ensure absolute tipping stability and stability
- Even in training mode, stability and durability are guaranteed, because X-Pollux is made of solid steel, with a total weight of 401 kg (235 kg dead weight and 180 kg weight blocks)
- The power station can withstand a total load of 800 kg and is ideal for all athletes who are looking for versatility and functionality with minimal space requirements and at the same time value safety and stability
9-piece accessories included
- X-Pollux comes with a curl and rowing bar, a triceps rope, two single handles, a lat pull bar, a leg and arm loop, a rigging plate, a pull chain and the versatile dual pull bar
- All accessories can be stored on the rear hook system to save space
Article ID
SKU | XX-PR-0210 |
EAN | 4260754399027 |
Color | Black |
Type of power station | Cable pull tower |
Type of loading | Side weights |
logo | Color logo |
Maximale Belastung
800
Kg
Up to 300
Kg
Cable pull
Weight block | 2x90kg |
Gear ratio | 2:1 |
roll | plastic |
Roll storage | Pressed ball bearings |
Cable | Quadruple coated steel cable |
Cable pull rotation | 180° |
Vertical adjustment | 30 steps |
Dimensions & footprint
Height | 220cm |
Width of the machine | 127cm |
Required training width | 127cm |
depth | 105cm |
Net weight | 401kg |
Load limits
Base frame | Up to 800kg, tensile strength and PSI load tested |
Cable pull mechanism | Up to 300kg per cable pull arm |
Base frame
Steel type | Alloy steel 11 gauge |
Square tube | 50mmx50mm |
Metal thickness | 3mm |
Coating | Double powder coating |
Corrosion resistance | Zinc alloy |
Hole Pattern & Compatibility
Hole pattern | 50mm |
Hole (pin) | 20mm |
Hole centre distance | 50mm |
Numbering and scaling | 30x laser engraved |
Weight Plate Compatibility | 50mm |
X-Pollux power station | 1x |
Weight blocks | 2x 90kg |
Dual drawbar | 1x |
Curl bar | 1x |
Triceps rope | 1x |
Lat pull-down bar | 1x |
Leg/arm strap | 1x |
Rigging plate | 1x |
One-hand handles | 1x set |
Chains and carabiners | 1x set |
Warranty & Certification
Guarantee base frame | LifeTime |
Warranty attachments | 5 years |
Permit | EN 20957 S , studio and commercial use possible |
Delivery & Assembly
Delivery costs | Free in Germany |
Delivery | Freight delivery on pallet |
Delivery type | Free curbside ticket |
Appointment | Email announcement with date selection |
Assembly time | 2.5h, two-man |
Required tools | Wrenches 14, 17 and 19, hexagon wrench, screwdriver |
Service & Return Policy
refund policy | 100 days after purchase |
Return costs | Free of charge |
Organisation of the return | Collection by forwarding agent with desired date |
Service included
Advice on training plan and equipment use | 1h online consultation included |
Quick Troubleshoot Service | 7-day remote support service |
On-site service | Nationwide |
Description
Foldable multi-press for limited space
- Our innovative design allows you to have a complete workout, including dumbbell training, without an additional barbell and without additional weight plates
- The resistance, for a variety of lever and pull exercises, can be adjusted directly on the device - no more changing the weights, just the pin on the weight blocks
- In addition, the power station can be folded up after training to save space and placed as close to the wall as possible
- The device, which is already very compact in training mode (220 x 127 x 105 cm (height/width/depth), only takes up 53 cm of space in rest mode
- With X-Pollux you save a lot of space and do not need any additional equipment
- Ideal for small rooms and all training areas that also serve another purpose, such as an office, garage, workshop or even living space
Multi-press with plug-in weights
- X-Pollux offers you the possibility of guided barbell training, without additional weight plates, simply by coupling the two weight blocks to the barbell bar of the multi-press
- For training you have 2 x 90 kg weight blocks at a gear ratio of 2:1
- For beginners, the Smith Machine offers more safety than training with free weights, because the barbell can be put down immediately and safely if strength is lost
- The corresponding emergency shelves can be quickly and easily adjusted to 30 different positions using a hook latch
- X-Pollux also reveals decisive advantages to professionals:
- The weight on the multi-press does not need to be stabilized horizontally, allowing optimal concentration on the target muscles
- In addition, the power station is ideal for reduction sets ("drop sets") due to the rapid adaptation of the training weight in order to exhaust the muscles to the maximum
- This involves training until muscle failure and immediately after the set reducing the weight by 15-20% so that further repetitions are possible until exhaustion again
- The Smith Machine is ideal for exercises such as incline bench presses or shoulder presses, where the rotator cuff is less stressed than with free weights
- Flat bench presses, also called guillotine presses on the Smith Machine, are possible, as are squats, lunges, shrugs, scoops, or seated and standing calf presses
Functional Trainer - All-in-One Solution
- You can also use the two 90 kg weight blocks for functional muscle training with the dual cable pull, as well as for seated rowing and lat pulldowns from above
- The cross-over cable pull can be positioned at 30 different levels - both pull towers can be used independently or simultaneously
- The dual pull bar allows you to use both weight blocks at the same time, which allows you to further increase the range of exercises on the functional trainer
- Lat pulldowns, rowing and single-arm cable rows, bicep curls, tricep pushdowns, cable flys, cable chest press, rotational overhead press, lateral and front raises, rear delt flys, face pulls, glute kickbacks, cable crunches, woodchoppers, kayak rows, pallof press, cable deadlifts, squats and much more can be trained with X-Pollux
- The multi-grip pull-up bar with integrated boulder handles allows for various pull-up variations as well as calisthenics exercises and intensive abdominal muscle training
- It has a high-quality rubber coating for a secure grip so that your grip strength does not become the limiting factor
Folding mechanism with 100% tipping stability & stability
- With the innovative folding mechanism, you can transform the device from training mode to space-saving mode in no time
- To do this, simply unlock the footrests, the pull-up bar and the Smith Bar and fold both elements down
- You can then fold the power station from the left and right to the middle and fix the footrests again - this saves you more than 50 cm on your training area
- When folded, the construction continues to ensure absolute tipping stability and stability
- Even in training mode, stability and durability are guaranteed, because X-Pollux is made of solid steel, with a total weight of 401 kg (235 kg dead weight and 180 kg weight blocks)
- The power station can withstand a total load of 800 kg and is ideal for all athletes who are looking for versatility and functionality with minimal space requirements and at the same time value safety and stability
9-piece accessories included
- X-Pollux comes with a curl and rowing bar, a triceps rope, two single handles, a lat pull bar, a leg and arm loop, a rigging plate, a pull chain and the versatile dual pull bar
- All accessories can be stored on the rear hook system to save space
Article ID
SKU | XX-PR-0210 |
EAN | 4260754399027 |
Color | Black |
Type of power station | Cable pull tower |
Type of loading | Side weights |
logo | Color logo |
Details
Maximale Belastung
800
Kg
Up to 300
Kg
Cable pull
Weight block | 2x90kg |
Gear ratio | 2:1 |
roll | plastic |
Roll storage | Pressed ball bearings |
Cable | Quadruple coated steel cable |
Cable pull rotation | 180° |
Vertical adjustment | 30 steps |
Dimensions & footprint
Height | 220cm |
Width of the machine | 127cm |
Required training width | 127cm |
depth | 105cm |
Net weight | 401kg |
Load limits
Base frame | Up to 800kg, tensile strength and PSI load tested |
Cable pull mechanism | Up to 300kg per cable pull arm |
Base frame
Steel type | Alloy steel 11 gauge |
Square tube | 50mmx50mm |
Metal thickness | 3mm |
Coating | Double powder coating |
Corrosion resistance | Zinc alloy |
Hole Pattern & Compatibility
Hole pattern | 50mm |
Hole (pin) | 20mm |
Hole centre distance | 50mm |
Numbering and scaling | 30x laser engraved |
Weight Plate Compatibility | 50mm |
Scope of delivery
X-Pollux power station | 1x |
Weight blocks | 2x 90kg |
Dual drawbar | 1x |
Curl bar | 1x |
Triceps rope | 1x |
Lat pull-down bar | 1x |
Leg/arm strap | 1x |
Rigging plate | 1x |
One-hand handles | 1x set |
Chains and carabiners | 1x set |
warranty
Warranty & Certification
Guarantee base frame | LifeTime |
Warranty attachments | 5 years |
Permit | EN 20957 S , studio and commercial use possible |
Delivery & Assembly
Delivery costs | Free in Germany |
Delivery | Freight delivery on pallet |
Delivery type | Free curbside ticket |
Appointment | Email announcement with date selection |
Assembly time | 2.5h, two-man |
Required tools | Wrenches 14, 17 and 19, hexagon wrench, screwdriver |
Service & Return Policy
refund policy | 100 days after purchase |
Return costs | Free of charge |
Organisation of the return | Collection by forwarding agent with desired date |
Service included
Advice on training plan and equipment use | 1h online consultation included |
Quick Troubleshoot Service | 7-day remote support service |
On-site service | Nationwide |