R8 Bradley EXO Add-on 2x95kg Dual 42cm POS6 / 108cm POS4

R8 Bradley EXO | Add-On | 6-Post | 2×95 kg

• Modular EXO cable pulley system with 49 angle combinations for maximum training freedom
• Add-on for existing R8 Power Racks
• 95 kg weight stack system for comfortable, fast adjustment
• Designed specifically for 6-post racks with a rear add-on, in positions 4 to 6

Two EXO Arms. 49 angles. No limits.

• Horizontal adjustment: 180° in 7 positions, vertical adjustment: 90° in 7 positions
• 49 angle combinations per side in total
• Ideal for Cable Flys, rows, Lat Pulldown, Face Pulls, curls, triceps presses and Functional Training
• Turns a fixed cable pulley point into a freely adjustable cable cross system

The cable pulley follows your movement – not the other way round.

• 360° rotating cable outlet for a clean cable path in the direction of pull
• No jamming, no rubbing against the frame
• Even force transfer and a natural training feel across the entire pull path

95 kg. Repinned fast. Always in flow.

• Laterally integrated weight stacks for maximum freedom of movement and additional rack stability
• Magnetic pin for lightning-fast weight changes
• Full Range of Motion, even resistance throughout the entire movement
• Ideal for structured training sessions with frequent weight changes

Rock-solid on the rack. Freely movable when adjusting.

• The trolley runs play-free on the upright – no wobble, no rattle, no give
• Under training load the arm locks into the force vector
• Tool-free adjustment, rack coating protected by UHMW plates
• Designed for 75 × 75 mm uprights

2:1 ratio. Controlled. Joint-friendly.

• Even resistance, finer weight increments, clean technique even on heavy sets

The upgrade your gym deserves.

• Compatible with R8 attachments such as the Step-Up Platform, Hip Thrust Pad, Leg Blocker and Dip Station
  
• On 78 cm and 108 cm racks, compatible with a retrofittable Smith Machine
• TÜV- and GS-certified to EN 20957 – suitable for commercial gyms

Which position is the right one for you?
The right choice comes down to three factors: your Weight System, the crossbar length of your front rack section and the depth of your rear add-on.

Step 1 – What kind of rear add-on do you have?
The depth of your rear add-on determines which positions are available to you at all:

• 42 cm add-on → position 4 only
• 78 cm add-on → position 4 or 5
• 108 cm add-on → position 4, 5 or 6

Step 2 – Where should the system sit?
Position 4 is always directly behind the rear uprights of the front rack section. Position 5 is the middle, position 6 is right at the back of the add-on.

Step 3 – Choose your crossbar and position in the configurator.
The crossbar selection (42 cm, 78 cm or 108 cm) refers to the depth of your front rack section – not the rear add-on.

Some combinations of crossbar and position share a variant because the cable and mechanics are identical. You choose your combination and land automatically on the right product. The matching cable is supplied depending on the position.

Do you have a 4-post rack? Then the R8 Bradley EXO | Add-On (positions 1–3) is the right product for you.