1m² MaxProtect Floor Protection Mat 30mm – 100x100cm

Note: Corner and edge pieces are not included in the set price - please add individually if needed.

MaxProtect: Strong, Safe, Versatile - Floor Protection Mats for the Highest Demands

• Dimensions: 100x100cm, height: 30mm
• Odorless thanks to 100% natural rubber
• Tested for harmful substances by the three leading institutes in Germany
  Verifiable with test reports
• Layer 1: EPDM rubber, 3 mm thick fine granulate for a firm grip and a high-quality look
• Layer 2: 13 mm to 23 mm thick coarse granulate (depending on the version) for high cushioning and noise reduction

AirCushion with Additional Air Channels

• In addition to the SolidProtect mat, equipped with MattConnect and AirChannel technology
• AirCushion technology with round air channels offers: additional shock absorption of the weight during drops, ventilation of the underside of the mat, and noise reduction
  

MattConnect: Unshakable Hold for Your Floor

• MattConnect: 16 plug connections per mat ensure a matrix bond of the entire floor protection
• Invisible from above, the fixing elements hold the tiles together
• They prevent the mats from slipping, even when moving equipment across the training area
• The mat ends can be fitted with corner pieces that attach seamlessly to the edges of the mat
• This creates a smooth transition between the mat and the floor, which prevents the formation of high edges
• This reduces trip hazards and makes it easier to maneuver Weight Benches or movable weight storage
• The end pieces thus not only offer a visually appealing solution, but also increase the safety and functionality of the flooring

Step-by-Step Instructions for Cutting and Laying the Floor Protection Mats:

1. Safety First: Put on suitable work gloves to avoid cuts.
2. Choosing the right tool: a sharp carpet or utility knife and a guide rail.
3. The surface should be flat and level. In addition, you should use, for example, cardboard boxes to protect the floor.
4. Measure precisely and mark the area to be cut with chalk or lightly score it with the knife.
5. Place the guide rail and pull the knife firmly through the mat without lifting it. The cut should be made in a single motion and the applied pressure should be even. Repeat this process until the mat is completely cut through. Spread the mat apart bit by bit as you cut to reduce friction. If necessary, moisten the knife a little with soapy water to allow better gliding. However, note that this also increases the risk of slipping.
6. Any gaps between the mats can simply be covered with black tape, thus preventing dust and dirt from getting in.

Article ID