1m² MaxProtect floor protection mat 25mm 100x100cm

MaxProtext: Strong, safe, versatile - floor protection mats for the highest demands

• Dimensions: 100x100cm, height: 25mm
• Odor-free thanks to 100% natural rubber
• Tested for harmful substances by the three leading institutes in Germany
  Verifiable with test reports
• Layer 1: Keltan EPDM rubber 2 mm thick fine granulate for firm grip and high-quality look
• Layer 2: 13 mm to 23 mm thick coarse granulate (depending on the version) for high damping and noise reduction

AirCushion with additional air channels

• In addition to the SolidProtect mat, equipped with MattConnect and AirChannel technology
• AirCushion technology with round air channels offers: Additional shock absorption of the weight during drops, ventilation of the mat underside and noise reduction
  

MattConnect: Unshakeable support for your floor

• MattConnect: 16 plug-in connections per mat ensure a matrix connection of the entire floor protection
• Invisible from above, the fixing elements hold the panels together
• They prevent the mats from slipping, even when moving equipment on the training area
• The mat ends can be equipped with corner pieces that fit seamlessly to the edges of the mat
• This creates a smooth transition between the mat and the floor, which prevents the formation of high edges
• This reduces tripping hazards and makes it easier to maneuver weight benches or movable weight racks
• The end pieces not only offer a visually appealing solution, but also increase the safety and functionality of the flooring

Step-by-step instructions for cutting and laying the floor protection mats:

1. Safety First: Wear suitable work gloves to avoid cuts.
2. Choosing the right tool: a sharp carpet or utility knife and a guide rail.
3. The surface should be flat and level. Additionally, you should use cardboard boxes, for example, to protect the floor.
4. Measure precisely and mark the area to be cut with chalk or lightly scratch it with a knife.
5. Place the blade on the guide rail and pull the knife forcefully through the mat without lifting it. The cut should be made in one motion, and the pressure applied should be even. Repeat this process until the mat is completely cut through. As you cut, spread the mat apart gradually to reduce friction. If necessary, moisten the blade slightly with soapy water to allow for better gliding. However, keep in mind that this also increases the risk of slipping.
6. Any gaps between the mats can simply be covered with black tape to prevent dust and dirt from getting in.

Article ID