Two Protective Layers + Air-Cushion Damping for Maximum Impact and Sound Protection

• Low odor due to 20% new rubber content
• Expertly tested Germany's leading testing institute
• Layer 1: Fine granulate (0.8 mm): slip-resistant and won't crumble
• Won't absorb water or sweat 
• Layer 2: Coarse granulate  (2.4 mm): soft, shock-absorbing, sound-insulating, high elasticity and impact-resistant.
• The bottom layer is ultra-pure and dye-free— won't leave marks on parquet, tiles or laminate
• Compatible with underfloor heating
• Tensile Strength:  4.4 MPa 
  
• UV-resistant
• Suitable for outdoor use
  
• High material density:  up to 300 kg per m2

AirCushion: The Ultimate in Protection

• Air-Cushion structure dramatically enhances both impact and sound absorption
• Especially well-suited for delicate surfaces and underfloor heating systems

Durability You Can Count On – Secured by Interlocking Connectors

• Each UltraProtect tile includes four built-in connectors that securely link the mats together
• The connectors are hidden from view but lock the tiles tightly in place
• Prevents tiles from shifting under equipment, movement, or bodyweight.

Built for High-Traffic Workout Spaces

• Professional Fitness Studios
• Functional Fitness Gyms
• Hotels
• Personal Training Studios
• Rehab and Recovery Centers

Premium Design

• Larger 100 x 100 cm tiles mean fewer joints and are ideal for covering bigger areas
• MaxProtect is also available in 30 mm thickness as the “UltraProtect” model

Step-by-Step Installation Instructions

1. Safety first:  Wear suitable work gloves to avoid cuts.
2. Choose the right tool:  A sharp carpet or utility knife and a straight edge work best.
3. Prep the cutting surface:  Work on a flat and level surface. Use cardboard or something similar under the mat to protect the cutting surface.   
4. Measure and mark:  Use a chalk line or lightly score the surface to mark where you'll cut.
5. Carefully cut:  Line up your straight edge and press firmly as you cut through the mat in one smooth motion. Gently pull the cut pieces apart to reduce friction. Repeat until the blade cuts all the way through. If needed, apply a little soapy water to the blade for smoother cutting—just be careful to maintain control.
6. Seal the gaps:  If needed, cover any large gaps with black tape to prevent dust and dirt from getting in.

article ID