4 m2 FlexProtect 8 mm 100x100 cm set I Including End Pieces

Pure Rubber. No Foam

• High density material.
• Performance-tested by Germany’s largest testing institute.
  
• Low-odor rubber blend made from 20% new industrial rubber and 80% recycled rubber.
  
• High-density compression delivers strong impact and sound protection at just 8 mm thickness.
• Compatible with underfloor heating.
• Supports weight drops up to 30 kg/cm² from a height of 50 cm.
• Built for small home gyms and commercial spaces, including hotels, sports clubs, physiotherapy practices and personal training facilities.
  
• Can be cut to size with a utility knife.

Secure Puzzle Connection

• Flush puzzle edges create a continuous floor protection surface.
• Unlike foam or synthetic materials, the puzzle corners resist warping and rippling under weight and impact.
• Each floor protection mat includes two end pieces for angled or narrow training areas.
• Loose lay installation works on all solid surfaces.

Beveled Edge Pieces

• End pieces for clean, flush edges are included in the set.

Cutting and Installation Guide

• Safety first: Wear suitable work gloves to reduce the risk of cuts.
  
• Use the right tools: a sharp utility knife and a straight edge.
  
• Place the mat on a flat, level surface. Use cardboard underneath to protect the floor.
  
• Measure carefully and mark the cut line with chalk or a light knife score.
  
• Use the straight edge as a guide to help you follow the line you marked on the mat and cut firmly through the mat without lifting the knife.
• Keep pressure even and cut in one continuous motion. Repeat until the mat is fully cut through. Pull the mat apart slightly as you cut to reduce friction. 
• If needed, lightly moisten the blade with soapy water for smoother cutting, but note that this can increase the risk of slipping.
  
• Cover any gaps between mats with black tape to help block dust and dirt.

Article ID