MaxProtect 4 m2 | 100x100 cm | 20 mm

Note: Corner and edge pieces are not included in the set price — please add them individually if needed.

MaxProtect: Strong, safe, versatile — floor protection mats for the highest theands

• Odor-free thanks to 100% natural rubber 
• Tested for harmful substances by the three leading into thetitutes in Germany 
  Verifiable with test reports
• Layer 1: EPDM rubber, 2 mm thick fine granulate for firm grip and a premium look
• Layer 2: 13 mm to 23 mm thick coarse granulate (depending on version) for high cushioning and noise reduction

AirCushion with Additional Air Channels

• In addition to the SolidProtect mat, equipped with MattConnect and AirChannel technology
• AirCushion Technologie with arounden air channels offers: Additional shock absorption of the weights with drops, Ventilierung the Mattenunterseite and noisereduzierung
  

MattConnect: Unshakable grip on your floor

• MattConnect: 16 connectors per mat ensure a matrix bond across the entire floor protection
• Invisible from above, the fixing elements hold the plates together
• They prevent the mats from slipping, even when equipment is moved across the training area
• The mat ends can be fitted with corner pieces that attach seamlessly to the mat edges
• This creates a smooth transition between mat and floor, preventing high edges
• This reduces trip hazards and makes it easier to maneuver weight benches or movable weight racks
• So the end pieces don't just look clean — they boost safety and functionality of the flooring

Step-by-Step Instructions for Cutting and Installing the Floor Protection Mats:

1. Safety first: Put on suitable work gloves to avoid cuts.
2. Choose the right tool: a sharp carpet or utility knife and a straight edge.
3. The surface should be flat and level. You should also use cardboard or similar to protect the floor.
4. Measure precisely and mark the area to be cut with chalk or lightly score it with the knife.
5. Place the straight edge and pull the knife firmly through the mat in one motion without lifting. The cut should be made in one smooth movement with even pressure. Repeat until the mat is completely cut through. Spread the mat apart piece by piece while cutting to reduce friction. If needed, moisten the blade with soapy water for smoother gliding — but note that this also increases the risk of slipping.
6. Any gaps between the mats can simply be covered with black tape to prevent dust and dirt from getting in.

Article ID